AX automatic softening water device

The total hardness of the inflow not exceed 8mgN/L, and the residual hardness of effluent can be 0.03mgN/L.

The boiler equipment can be safety and economical operation, water treatment is very important.If the boiler feed water does not dispose for or processes improper, it must scale inevitably in the heating surface, and make the furnace wall reduce heat transfer performance, increase fuel consumption, cause corrosion, wild tube, and even explosion accident. Especially in the original water hardness larger area. Popularize boiler water treatment has important meaning to ensure the boiler safe and economic operation; increase the efficiency; extend the boiler's service life and save energy.

Automatic softening water device is the latest device that especially signed for each model and design of supporting the boiler. Automatic softening water controller, control valves what are produced by Autotrol·Frank company in USA can offer many kinds of the way of control, thus ensure exchange column produce a water yield enough. The total hardness of the inflow not exceed 8mgN/L, and the residual hardness of effluent can be 0.03mgN/L which is the national standards of boiler water.

The main technical parameters

Installation guidelines

(1) Automatic softening water device covers small a area, so you just need consider the surface load and surface level.

(2)Inflow need tap water, and it's working pressure is 0.15MPa-0.6Mpa.

(3)If the pressure of inflow can't meet the operation requirements, you should take measures to pressure.

(4) This device should match a soft water tank, its volume should be based on the different models and circumstances of boiler water inflow, in order to meet the requirements of the boiler water inflow.

(5) Raw material should be no more than 5mgN/L. 

AX automatic softening water device